|
The Bounty Hunter Fast Tracker Metal Detector is the basic introductory model, which means that its a great starter metal detector. The Bounty Hunter Fast Tracker Metal Detector will detect in extreme ground conditions from saltwater beaches to highly mineralized inland sites with no operator adjustments and no loss of sensitivity. The Bounty Hunter Fast Tracker Metal Detector relies on two-tone target identification for fun and easy discriminate capability. The Bounty Hunter Fast Tracker Metal Detector is easy to operate, highly rugged, comfortable, lightweight (only 2.5 pounds) and extremely efficient in the field. Easy to use and operate, this is great for the whole family, or the occasional weekend warrior. Its pre-set to ignore ground minerals, so you dont have to adjust anything, allowing you plenty of thrills on your search for buried treasure. The 7.25 inch waterproof search coil and telescoping metal shaft permits you to detect coin size objects up to 7 inches under the grounds surface, and up to 24 inches deep for larger objects. The s-rod handle system, combined with the substantial reach of the Bounty Hunter Fast Tracker Metal Detector allows you to comfortably search extensive varieties of terrain. The Bounty Hunter Fast Tracker Metal Detector requires two 9 volt alkaline batteries (not included)
|
|
|
|
|
|
|
|
|
|
|
|
-
Operation Modes: Adjustable discrimination
-
Detection Depth: Coin sized objects: 7 in
Larger objects: Up to 24 in
-
Ground Balance: Preset
-
Sensitivity: Adjustable between 'ON' and 'HIGH'
-
Audio Alert: Dual tone
-
Console Controls: 2 control knobs - Discrimination and power/sensitivity 1 all-metal discrimination switch Low battery indicator
-
Detectable Materials: Iron, Pull tabs, Pennies, Silver, Copper
-
Transmitter: 7.25 in Interchangeable, Waterproof search coil
-
Metal Shaft: Adjustable length - 6 settings
-
Arm Rest: Foam padded
-
Headphone Jack: Standard
-
Battery Requirement: (2) 9 V alkaline batteries (not included)
-
Weight: 2.5 lbs
-
Detector Category: Hobby
-
Package Weight: 5 lbs
-
Made In: USA
-
 Owner's Manual
Product Overview & Specs
The Bounty Hunter Fast Tracker Metal Detector is the basic introductory model, which means that its a great starter metal detector. The Bounty Hunter Fast Tracker Metal Detector will detect in extreme ground conditions from saltwater beaches to highly mineralized inland sites with no operator adjustments and no loss of sensitivity. The Bounty Hunter Fast Tracker Metal Detector relies on two-tone target identification for fun and easy discriminate capability. The Bounty Hunter Fast Tracker Metal Detector is easy to operate, highly rugged, comfortable, lightweight (only 2.5 pounds) and extremely efficient in the field. Easy to use and operate, this is great for the whole family, or the occasional weekend warrior. Its pre-set to ignore ground minerals, so you dont have to adjust anything, allowing you plenty of thrills on your search for buried treasure. The 7.25 inch waterproof search coil and telescoping metal shaft permits you to detect coin size objects up to 7 inches under the grounds surface, and up to 24 inches deep for larger objects. The s-rod handle system, combined with the substantial reach of the Bounty Hunter Fast Tracker Metal Detector allows you to comfortably search extensive varieties of terrain. The Bounty Hunter Fast Tracker Metal Detector requires two 9 volt alkaline batteries (not included)
Dual Tone Audio Discrimination
With a simple dual tone audio discrimination, the Bounty Hunter Fast Tracker Metal Detector specifies what you have detected with a low tone for gold and nickel type objects, and a high tone for copper, silver or brass metals. Making identification of general metal classes available, you can eliminate digging for junk materials like pull tabs or aluminum cans.
7.25 inch Waterproof Search Coil
Providing a 7.25 inch diameter search area, the waterproof search coil creates a sufficient transmitting range for detecting objects between rocks on rough terrain or underwater. Interchangeable between different search coil diameters, you"re search area is never fixed.
7 to 24 inch Depth Sensitivity
With electronics that allow you to detect coin sized objects up to 7 inches, and larger objects up to 24 inches, the conveniently located control knob allows you to determine the depth your transmitter will detect metals. The sensitivity control knob that rotates from on/off to maximum allows you adjust your search coils detection depth.
S-Rod Handle System
Cushioned for comfort while treasure hunting for long distances, the Bounty Hunter Fast Tracker Metal Detector features an S-rod handle system for optimum control of your Great Product as you sweep your Bounty Hunter Fast Tracker Metal Detector across the terrain.
|
|
|
