|
This National Public Seating 6300 Series Heavy Duty Lab Stool with Hardboard Square Seat and Backrest is made of 7/8 inch O.D, 18 gauge steel tubing. The seat is a full 14 inch diameter with an 11-1/2 inch diameter masonite board recessed into the seat pan and will not chip or crack. The foot ring is welded to each leg, with four contact points at each leg for added rigidity. This gray finished Drafting Stool-Chair is offered in 18, 24, 30 inch height.
|
|
|
|
|
|
|
|
|
|
|
|
-
Seat Height: 18 in, 24 in, 30 in
-
Seat Size: 16.80 in L x 16.80 in W
-
Backrest Size: 12.00 in W x 6.00 in H
-
Frame Material: Heavy duty 18-gauge 7/8 inch steel tubing
-
Backrest Type: 12.00 in backrest
-
Color: Gray
-
Cushion: Without padding
-
Finish: Chrome plated
-
Wheels/Casters: Without wheels
-
Arms: Without arm
-
Foot: With foot ring
-
Product Shown: in Gray color
-
 Assembly Instructions
Product Overview & Specs
This National Public Seating 6300 Series Heavy Duty Lab Stool with Hardboard Square Seat and Backrest is made of 7/8 inch O.D, 18 gauge steel tubing. The seat is a full 14 inch diameter with an 11-1/2 inch diameter masonite board recessed into the seat pan and will not chip or crack. The foot ring is welded to each leg, with four contact points at each leg for added rigidity. This gray finished Drafting Stool-Chair is offered in 18, 24, 30 inch height.
- Made of 7/8" O.D, 18 gauge steel tubing
- Comes in gray finish
- Backrest adjusts up/down and forward/back
- Masonite board recessed into the seat pan and will not chip or crack
- Foot ring is welded to each leg, with 4 contact points
- Available in 18", 24", 30" height
|
|
|
